The first thing that comes to mind when I hear of Kährs is…
They. Are. Not. Cheap.
I wrote this review on Kährs engineered hardwood flooring because I have worked with them before, and it’s unfortunate many folks shy away because of their higher-end pricing.
However, once you understand how Kährs makes its products, you realize you simply get what you pay for.
Here is a thorough overview of the entire process:
The original Kährs manufacturing video
After watching this, one truly gets a deeper understanding and appreciation of just why these floors cost more than just about any other hardwood floor out there.
Before getting into each collection…
Just be wary of super low prices online for these products as it’s usually a red flag.
Kährs engineered hardwood collections: what’s available now
I originally broke these floors down by thickness and individual collection. But manufacturers change their ranges, colors and product names over time. I’m not going to send you shopping for a floor that may no longer exist!
I updated the table below using Kährs’ current U.S. product range. You can browse the current Kährs U.S. wood flooring catalog here.
| Estate | Canvas | Beyond Retro | Lux |
| Småland | Tres | Life Essential | Life Authentic Plank |
| Wide Canvas | Classic Nouveau | Element | Capital |
| Texture | Life Authentic Herringbone | Harmony | European Renaissance |
| Studio | European Naturals | Ground | Founders |
| Sand | Scandinavian Naturals | American Naturals | World |
| Large Herringbone |
Which Kährs floor would I choose?
For a thin, real-wood floor
Look at Life Essential or Life Authentic. These are real-wood veneer floors, but Kährs says they cannot be sanded. So if your heart is set on a particular color, you will not be able to change it once it’s installed. Good to know before install!
For a traditional engineered hardwood
Start with Canvas, Wide Canvas, Tres, Lux and the other engineered collections. We have installed products from these ranges quite a bit. Some other products are just overpriced; not so much here. Grain and color are so vivid and clear; they have that wow factor even with the darker shades. Kährs has added wider Canvas planks and new Life Authentic formats, so check the actual specifications for the product you like.
For character, wide planks or patterned floors
Take a look at Småland, Estate, Beyond Retro, European Renaissance and the current herringbone offerings. There is something for everyone, whether you like the classic hand-scraped look or a more exotic one with a wide color and shade variation between boards. Just make sure this is the type of look you like before purchasing, and check the installation instructions for the exact product.
My experience installing these floors
Super easy to install with airtight joints and offer a wide range of looks in terms of plank width and colors.
Their boards are longer than other wood we’ve worked with, so you get fewer cuts. Also, since they are milled with such precision, you get as good a fit as possible.
Clients immediately praise the product’s distinct look, particularly the oil-based finishes, which bring out the wood’s otherwise hidden hues into vivid, deep color.
Since their woods are all treated differently and come in various wood species and finishes, the result is a unique look that changes in different lighting and the angle you’re looking at the floor.
The walnut products are softer than oak and tend to wear a little faster; so lower traffic areas would suit them much better.
Yes, you may pay a little extra than competing products. However, try and find a similar product with the same quality in construction and finish.
I have yet for the life of me, throughout my flooring years, managed to work out why someone would cheap out on the installation when this is the most critical factor in the entire floor buying experience.
Things to look out for
The main thing to be aware of is some of these woods tend to noticeably change color over time, so do not be surprised when it happens.
Wood changes over time, but it can also appear different from different angles and lighting.
Lastly, since many of these products are designed to look worn and distressed, they may have natural knots and minor cracks. This is part of the character of the wood and not a defect, so just be aware of that.
I will repeat the following point for each series because it cannot be emphasized enough: Depending on who installs this floor, make sure they know what they’re doing.
Stability – a key benefit
As the world’s oldest hardwood flooring manufacturer, this Swedish-based company has been manufacturing hardwood flooring for over 160 years. They were the very first to pioneer the concept of engineered hardwood flooring. So they know a thing or two about them.
They are all-around far less sensitive to changes in humidity and temperature. Translation: They will not move around anywhere near as much as solid hardwood. Kahr’s trademarked Woodloc® system redefined the wood flooring industry by introducing the very first glueless locking system, which made boards fit so seamlessly together, they were gap-free.
That doesn’t mean engineered hardwood is waterproof, immune to moisture, or incapable of gapping or buckling. If the slab is wet or the installation is wrong, you can still have a very expensive problem. I’ve covered related issues in my guide to hardwood cupping, buckling and gapping.
Can you sand and refinish Kährs flooring?
So with all of these different thicknesses and choices, which one do you choose? Let me make it easy: It all depends on the type of look you like and how many times you would like or plan on resanding your floor. Just remember that the hardwood wear layer matters more than the overall thickness when it comes to refinishing.
Some Kährs floors can be sanded and refinished more than once, while others cannot be sanded at all. Here are the current products I checked and what Kährs says about each one:
- Canvas: Oak Cadence Matte — 2 sandings.
- Canvas Wide: Oak Fawn Wide Matte — 2 sandings.
- Tres: Ash Vaila — 2 sandings.
- Lux: Oak Horizon — 2 sandings.
- Estate: Hickory Hearst Matte — 2–3 sandings.
- Life Authentic: Oak Saffron Plank — not sandable; this is a thin veneer floor.
So a floor that allows you to refinish it 2-3 times entirely is a floor that should last two lifetimes, pure and simple. But remember, those sanding numbers are for the exact products listed above, not every floor in a collection.
An alternative to completely refinishing your floors is to do what’s known as a screen and recoat. This is where the top layers of polyurethane are removed, and new coats are applied to give it a pristine, new look. This is often done at a fraction of a new resand and restain cost or when you just want to give new life to a worn floor. If you want to change the actual wood color, you’re looking at a proper resand and refinish.
A few things I’d check before ordering
- Confirm the SKU and current stock with the supplier.
- Check the approved glue-down, floating or nail-down method for that specific product.
- Check the subfloor flatness and moisture requirements before installation.
- Ask whether the floor is sandable, and if so, what the manufacturer actually permits.
- Order matching transitions at the same time as the floor.
After investing good money into purchasing these floors, please do not take any shortcuts on the labor costs because you will be sorry. I have seen it way too often. Just find an experienced, qualified installer. The number one complaint on claims in the hardwood floor industry is incorrect installation and has been for a very long time.
Floor preparation and finished hardwood floors
Here are photos from one of our installations, showing the preparation and finished floor.
Before and during floor preparation


The finished floor


Four important installation factors
Adhesive – This is extremely important, so please listen up!
Don’t just buy any adhesive. Insist on what’s approved/recommended by Kahrs, like Taylor 2071, or Bostik’s Best ®.
See, in the unlikely event you ever run into a warranty claim, the first thing the inspector will do is ask what adhesive you used.
Now, if you tell them it was anything other than a satisfactory and/or approved adhesive, they will go back and file a report stating denying your warranty request. The reason is “incorrect adhesive used.”
I’m warning you now, don’t buy just any glue (no matter what a salesperson tells you) because it will void your product warranty.
Transition pieces
All of these collections come with their coordinating transition pieces, so be sure to order what you need. Generally speaking, T-Molds transition between two hard surfaces like hardwood and tile and reducers for hard and soft surfaces like carpet or ones that are thinner like vinyl. Ask your salesperson or installer if you are unsure.
Leveling and floor preparation
Before your floor is installed over concrete, the slab must be floated to eliminate low spots.
There’s a difference between a level slab and a flat one.
I have yet to see a single residential level concrete slab in all my years in this industry! Don’t confuse the two. Floating doesn’t level your entire slab; it just means you fill in the natural topography of the slab with compound to get rid of low spots for a better installation.
Please consult your installer or contractor because this incurs an additional charge.
The cost depends on how much preparation the slab needs, the material being used, and the amount of labor involved. Get it included in the quote before work begins.
Internet purchases
It is your floor, so you bear the full responsibility of where you source materials from. Kährs has warned that purchasing through unauthorized online sellers can affect warranty coverage, so check that before you buy.
We’ve been buying and installing Stuga flooring since 2019, and Stuga has confirmed it sources some of its floors from Kährs. I’m comfortable recommending them.
As a personal anecdote, I’ve experienced zero issues with Kahrs hardwood irrespective of where it was bought.
What about Stuga?
Now here’s a connection worth knowing. We’ve been buying and installing Stuga flooring since 2019. Back then, Stuga confirmed to me that it was private-labeling Kährs flooring. I also checked two particular products in 2020 and was told Kährs Oak Etch and Stuga Forest were equivalent.
I checked with Stuga again this year about the current arrangement. They confirmed they source selected floors from European manufacturers, including Kährs. So yes, there's a real connection between the brands!
For anyone comparing products, there are a few different questions worth asking:
- Want waterproof real wood? Read Stuga’s Rebels waterproof-floor information. Read the actual limitations; a surface-spill claim is not a promise against flooding or moisture from below.
- Want engineered hardwood you can refinish? See Stuga’s Icons range, then check the construction and refinishing instructions for the exact floor you want. Not every engineered floor can be sanded, and a screen and recoat is not the same as a full refinish.
- Choosing for a design project? Don't rely on a tiny screen swatch. Browse Stuga flooring and order samples of the actual colors you're considering and look at them in the room, in different light.
And One Thing About Delivery: On one Stuga installation, 74 boxes arrived at a client's house and were left on a sloped driveway in the Texas summer. I ended up carrying all 74 boxes inside myself. Don't assume curbside delivery means the driver is going to put everything in the house for you. Arrange the unloading and storage before the truck arrives. See Stuga's delivery information.
Before anything gets installed, inspect the shipment, check the product and quantity, examine boards from multiple cartons, and follow the manufacturer's current site-condition and moisture requirements. If there's a problem, stop and document it before installation.
Final thoughts
My personal experience with Kährs has been positive, starting from the material quality to ease of installation to high client satisfaction rates.
I found the small things this company does to its products make for a terrific end-user experience.
For example, their products are factory sealed in their boxes at a specific temperature and humidity to ensure the materials inside the box are kept stable.
Translation: It can minimize the need to acclimate the product. Of course, always consult each product’s instructions. Kährs’ current U.S. instructions may require at least 24 hours if the storage and jobsite conditions cannot be confirmed.
The boards are rich in grain where they need to be and perfectly calibrated at the joints to make for seamless installation.
Brilliant color and finish are distinguishing features separating them from competing products. Some lines come with considerably heavier (denser) boards than what one is used to.
The quality in construction and finish is one reason Kährs is my go-to for anyone after the very finest in wood flooring. Kährs has a long manufacturing history in Sweden, although production locations vary by collection.
They also happen to put a lot of emphasis on environmental responsibility. If this matters to you, check the certifications and documentation for the specific floor you're buying.
The various collections give you a vast range to choose from. This will depend on the look and finish you like and your anticipated frequency of refinishing them.
If you’re undecided on which product to go for, start with the overall look you like (hand-scraped, heavy grain, greys, log-cabin feel, contemporary, etc.) or color scheme, and go from there.
I hope this review has been helpful to you if you’re considering Kährs hardwood flooring.
Affiliate disclosure: This article contains affiliate links. If you purchase through these links, we may be compensated at no additional cost to you. All opinions are our own.

